Interoperability middleware for IIoT gateways based on international standard ontologies and standardized digital representation

Recent advances in the areas of microelectronics, information technology, and communication protocols have made the development of smaller devices with greater processing capacity and lower energy consumption. This context contributed to the growing number of physical devices in industrial environments which are interconnected and communicate via the internet, enabling concepts such as Industry 4.0 and the Industrial Internet of Things (IIoT). These nodes have different sensors and actuators that monitor and control environment data. Several companies develop these devices, including diverse communication protocols, data structures, and IoT platforms, which leads to interoperability issues. In IoT scenarios, interoperability is the ability of two systems to communicate and share services. Therefore, communication problems can make it unfeasible to use heterogeneous devices, increasing the project’s financial cost and development time. In an industry, interoperability is related to different aspects, such as physical communication, divergent device communication protocols, and syntactical problems, referring to the distinct data structure. Developing a new standard for solving these matters may bring interoperability-related drawbacks rather than effectively solving these issues. Therefore, to mitigate interoperability problems in industrial applications, this work proposes the development of an interoperability middleware for Edge-enabled IIoT gateways based on international standards. The middleware is responsible for translating communication protocols, updating data from simulations or physical nodes to the assets’ digital representations, and storing data locally or remotely. The middleware adopts the IEEE industrial standard ontologies combined with assets’ standardized digital models. As a case study, a simulation replicates the production of a nutrient solution for agriculture, controlled by IIoT nodes. The use case consists of three devices, each equipped with at least five sensors or actuators, communicating in different communication protocols and exchanging data using diverse structures. The performance of the proposed middleware and its proposed translations algorithms were evaluated, obtaining satisfactory results for mitigating interoperable in industrial applications.Devido a recentes avanços nas áreas de microeletrônica, tecnologia da informação, e protocolos de comunicação tornaram possível o desenvolvimento de dispositivos cada vez menores com maior capacidade de processamento e menor consumo energético. Esse contexto contribuiu para o crescente nú- mero desses dispositivos na industria que estão interligados via internet, viabilizando conceitos como Indústria 4.0 e Internet das Coisas Industrial (IIoT). Esses nós possuem diferentes sensores e atuadores que monitoram e controlam os dados do ambiente. Esses equipamentos são desenvolvidos por diferentes empresas, incluindo protocolos de comunicação, estruturas de dados e plataformas de IoT distintos, acarretando em problemas de interoperabilidade. Em cenários de IoT, interoperabilidade, é a capacidade de sistemas se comunicarem e compartilharem serviços. Portanto, esses problemas podem inviabilizar o uso de dispositivos heterogêneos, aumentando o custo financeiro do projeto e seu tempo de desenvolvimento. Na indústria, interoperabilidade se divide em diferentes aspectos, como comunicação e problemas sintáticos, referentes à estrutura de dados distinta. O desenvolvimento de um padrão industrial pode trazer mais desvantagens relacionadas à interoperabilidade, em vez de resolver esses problemas. Portanto, para mitigar problemas relacionados a intoperabilidade industrial, este trabalho propõe o desenvolvimento de um middleware de interoperável para gateways IIoT baseado em padrões internacionais e ontologias. O middleware é responsável por traduzir diferentes protocolos de comunicação, atualizar os dados dos ativos industriais por meio de suas representações digitais, esses armazenados localmente ou remotamente. O middleware adota os padrões ontológicos industriais da IEEE combinadas com modelos digitais padronizados de ativos industriais. Como estudo de caso, são realizadas simulações para a produção de uma solução nutritiva para agricultura, controlada por nós IIoT. O processo utiliza três dispositivos, cada um equipado com pelo menos cinco sensores ou atuadores, por meio de diferentes protocolos de comunicação e estruturas de dados. O desempenho do middleware proposto e seus algoritmos de tradução foram avaliados e apresentados no final do trabalho, os quais resultados foram satisfatórios para mitigar a interoperabilidade em aplicações industriais

Desenvolvimento de dispositivo de sensoreamento para cidades inteligentes usando o padrão LoRaWAN

O presente trabalho apresenta o desenvolvimento de um sistema embarcado que pode ser utilizado na implementação de um dispositivo aplicado à ”Internet das Coisas” (IoT) utilizando o padrão LoRaWAN. A tecnologia LoRa promete um link de comunicação de longo alcance como também um consumo energético inferior quando comparado a outras tecnologias utilizadas em aplicações IoT. O trabalho descreve o desenvolvimento e implementação de um nó sensor e de um gateway LoRaWAN incluindo tanto a parte de hardware quanto de firmware. Dada a importância de aspectos como consumo energético e alcance de comunicação, foram realizados testes de validação experimental para analisar essas características. Os resultados obtidos foram plenamente satisfatórios e indicam adequacidade do dispositivo desenvolvido para as aplicações visadas.This work presents the development of an embedded system that can be used in the implementation of an “Internet of Things” (IoT) device based on the LoRaWAN protocol. The LoRa technology promises the advantages of low energy consumption as well as a long-range communication link when compared with other similar technologies for IoT devices. The work describes both the hardware and firmware development and deployment. Given the importance of aspects such as power consumption and communication range, some validation tests were performed and the obtained results are described. The obtained results were very satisfactory an indicate the adequacy of the developed Lorawan devices for the target applications

Juxtaposing BTE and ATE – on the role of the European insurance industry in funding civil litigation

One of the ways in which legal services are financed, and indeed shaped, is through private insurance arrangement. Two contrasting types of legal expenses insurance contracts (LEI) seem to dominate in Europe: before the event (BTE) and after the event (ATE) legal expenses insurance. Notwithstanding institutional differences between different legal systems, BTE and ATE insurance arrangements may be instrumental if government policy is geared towards strengthening a market-oriented system of financing access to justice for individuals and business. At the same time, emphasizing the role of a private industry as a keeper of the gates to justice raises issues of accountability and transparency, not readily reconcilable with demands of competition. Moreover, multiple actors (clients, lawyers, courts, insurers) are involved, causing behavioural dynamics which are not easily predicted or influenced. Against this background, this paper looks into BTE and ATE arrangements by analysing the particularities of BTE and ATE arrangements currently available in some European jurisdictions and by painting a picture of their respective markets and legal contexts. This allows for some reflection on the performance of BTE and ATE providers as both financiers and keepers. Two issues emerge from the analysis that are worthy of some further reflection. Firstly, there is the problematic long-term sustainability of some ATE products. Secondly, the challenges faced by policymakers that would like to nudge consumers into voluntarily taking out BTE LEI

Penilaian Kinerja Keuangan Koperasi di Kabupaten Pelalawan

This paper describe development and financial performance of cooperative in District Pelalawan among 2007 - 2008. Studies on primary and secondary cooperative in 12 sub-districts. Method in this stady use performance measuring of productivity, efficiency, growth, liquidity, and solvability of cooperative. Productivity of cooperative in Pelalawan was highly but efficiency still low. Profit and income were highly, even liquidity of cooperative very high, and solvability was good

Search for stop and higgsino production using diphoton Higgs boson decays

Results are presented of a search for a "natural" supersymmetry scenario with gauge mediated symmetry breaking. It is assumed that only the supersymmetric partners of the top-quark (stop) and the Higgs boson (higgsino) are accessible. Events are examined in which there are two photons forming a Higgs boson candidate, and at least two b-quark jets. In 19.7 inverse femtobarns of proton-proton collision data at sqrt(s) = 8 TeV, recorded in the CMS experiment, no evidence of a signal is found and lower limits at the 95% confidence level are set, excluding the stop mass below 360 to 410 GeV, depending on the higgsino mass

Severe early onset preeclampsia: short and long term clinical, psychosocial and biochemical aspects

Preeclampsia is a pregnancy specific disorder commonly defined as de novo hypertension and proteinuria after 20 weeks gestational age. It occurs in approximately 3-5% of pregnancies and it is still a major cause of both foetal and maternal morbidity and mortality worldwide1. As extensive research has not yet elucidated the aetiology of preeclampsia, there are no rational preventive or therapeutic interventions available. The only rational treatment is delivery, which benefits the mother but is not in the interest of the foetus, if remote from term. Early onset preeclampsia (<32 weeks’ gestational age) occurs in less than 1% of pregnancies. It is, however often associated with maternal morbidity as the risk of progression to severe maternal disease is inversely related with gestational age at onset2. Resulting prematurity is therefore the main cause of neonatal mortality and morbidity in patients with severe preeclampsia3. Although the discussion is ongoing, perinatal survival is suggested to be increased in patients with preterm preeclampsia by expectant, non-interventional management. This temporising treatment option to lengthen pregnancy includes the use of antihypertensive medication to control hypertension, magnesium sulphate to prevent eclampsia and corticosteroids to enhance foetal lung maturity4. With optimal maternal haemodynamic status and reassuring foetal condition this results on average in an extension of 2 weeks. Prolongation of these pregnancies is a great challenge for clinicians to balance between potential maternal risks on one the eve hand and possible foetal benefits on the other. Clinical controversies regarding prolongation of preterm preeclamptic pregnancies still exist – also taking into account that preeclampsia is the leading cause of maternal mortality in the Netherlands5 - a debate which is even more pronounced in very preterm pregnancies with questionable foetal viability6-9. Do maternal risks of prolongation of these very early pregnancies outweigh the chances of neonatal survival? Counselling of women with very early onset preeclampsia not only comprises of knowledge of the outcome of those particular pregnancies, but also knowledge of outcomes of future pregnancies of these women is of major clinical importance. This thesis opens with a review of the literature on identifiable risk factors of preeclampsia

Height and body-mass index trajectories of school-aged children and adolescents from 1985 to 2019 in 200 countries and territories: a pooled analysis of 2181 population-based studies with 65 million participants

Summary Background Comparable global data on health and nutrition of school-aged children and adolescents are scarce. We aimed to estimate age trajectories and time trends in mean height and mean body-mass index (BMI), which measures weight gain beyond what is expected from height gain, for school-aged children and adolescents. Methods For this pooled analysis, we used a database of cardiometabolic risk factors collated by the Non-Communicable Disease Risk Factor Collaboration. We applied a Bayesian hierarchical model to estimate trends from 1985 to 2019 in mean height and mean BMI in 1-year age groups for ages 5–19 years. The model allowed for non-linear changes over time in mean height and mean BMI and for non-linear changes with age of children and adolescents, including periods of rapid growth during adolescence. Findings We pooled data from 2181 population-based studies, with measurements of height and weight in 65 million participants in 200 countries and territories. In 2019, we estimated a difference of 20 cm or higher in mean height of 19-year-old adolescents between countries with the tallest populations (the Netherlands, Montenegro, Estonia, and Bosnia and Herzegovina for boys; and the Netherlands, Montenegro, Denmark, and Iceland for girls) and those with the shortest populations (Timor-Leste, Laos, Solomon Islands, and Papua New Guinea for boys; and Guatemala, Bangladesh, Nepal, and Timor-Leste for girls). In the same year, the difference between the highest mean BMI (in Pacific island countries, Kuwait, Bahrain, The Bahamas, Chile, the USA, and New Zealand for both boys and girls and in South Africa for girls) and lowest mean BMI (in India, Bangladesh, Timor-Leste, Ethiopia, and Chad for boys and girls; and in Japan and Romania for girls) was approximately 9–10 kg/m2. In some countries, children aged 5 years started with healthier height or BMI than the global median and, in some cases, as healthy as the best performing countries, but they became progressively less healthy compared with their comparators as they grew older by not growing as tall (eg, boys in Austria and Barbados, and girls in Belgium and Puerto Rico) or gaining too much weight for their height (eg, girls and boys in Kuwait, Bahrain, Fiji, Jamaica, and Mexico; and girls in South Africa and New Zealand). In other countries, growing children overtook the height of their comparators (eg, Latvia, Czech Republic, Morocco, and Iran) or curbed their weight gain (eg, Italy, France, and Croatia) in late childhood and adolescence. When changes in both height and BMI were considered, girls in South Korea, Vietnam, Saudi Arabia, Turkey, and some central Asian countries (eg, Armenia and Azerbaijan), and boys in central and western Europe (eg, Portugal, Denmark, Poland, and Montenegro) had the healthiest changes in anthropometric status over the past 3·5 decades because, compared with children and adolescents in other countries, they had a much larger gain in height than they did in BMI. The unhealthiest changes—gaining too little height, too much weight for their height compared with children in other countries, or both—occurred in many countries in sub-Saharan Africa, New Zealand, and the USA for boys and girls; in Malaysia and some Pacific island nations for boys; and in Mexico for girls. Interpretation The height and BMI trajectories over age and time of school-aged children and adolescents are highly variable across countries, which indicates heterogeneous nutritional quality and lifelong health advantages and risks

Search for anomalous production of events with three or more leptons in pp collisions at √s = 8TeV

Published by the American Physical Society under the terms of the Creative Commons Attribution 3.0 License. Further distribution of this work must maintain attribution to the author(s) and the published articles title, journal citation, and DOI.A search for physics beyond the standard model in events with at least three leptons is presented. The data sample, corresponding to an integrated luminosity of 19.5fb-1 of proton-proton collisions with center-of-mass energy s=8TeV, was collected by the CMS experiment at the LHC during 2012. The data are divided into exclusive categories based on the number of leptons and their flavor, the presence or absence of an opposite-sign, same-flavor lepton pair (OSSF), the invariant mass of the OSSF pair, the presence or absence of a tagged bottom-quark jet, the number of identified hadronically decaying τ leptons, and the magnitude of the missing transverse energy and of the scalar sum of jet transverse momenta. The numbers of observed events are found to be consistent with the expected numbers from standard model processes, and limits are placed on new-physics scenarios that yield multilepton final states. In particular, scenarios that predict Higgs boson production in the context of supersymmetric decay chains are examined. We also place a 95% confidence level upper limit of 1.3% on the branching fraction for the decay of a top quark to a charm quark and a Higgs boson (t→cH), which translates to a bound on the left- and right-handed top-charm flavor-violating Higgs Yukawa couplings, λtcH and λctH, respectively, of |λtcH|2+|λctH|2<0.21

Measurement of associated W plus charm production in pp collisions at √s=7 TeV

Peer reviewe